🧊 3D Model Viewer
Open a factory or customer 3D model without installing anything: drop GLB, glTF, OBJ, STL, PLY, STEP or IGES into the browser to orbit it, read its dimensions, switch render modes and capture a PNG. Files never leave your browser.
📦 Model files
📊 File & statistics
- File
- —
How to use 3D Model Viewer
Follow the steps to get it done
Drop model files into the upload area at the top of the page, or click “Choose files”; for glTF or OBJ, select the .bin, .mtl and textures together
Open the page and start — no registration or sign-in needed.
Once loaded, drag to orbit and scroll to zoom, then use the six camera presets, render modes and lighting to inspect the model
Settings can be changed at any time; all computation happens in your browser.
Read the length, width and height under the statistics, frame a good angle and capture a PNG to download, copy or save to the cloud
Copy or download the result when you are done. Nothing is kept on this site.
Page Actions
The large blue button in the middle of the upload area: opens the system file picker and allows multiple selection, so you can pick the main model together with the .bin, .mtl and textures.
Drop files anywhere inside the dashed box to start loading; while dragging over it the area turns into a blue dropzone, and after dropping the file set is sorted automatically.
Clicking any empty part of the dashed box also opens the file picker. When focused with the keyboard, Enter or Space opens it too, so no mouse is required.
After loading, the upload area becomes a file card in place, showing the main file name, size and “format · companion file count”. Click anywhere on the card, or drop a new file set onto it, to replace the current model without deleting it first; a persistent hint on the card says so.
Always visible beside the upload area at the top: first the file name, format, size and companion count; after loading it adds mesh count, triangle count, vertex count, dimensions and unit, with numbers grouped by thousands.
A persistent small note under the statistics: OBJ, STL and PLY show that the file declares no unit, and it switches to a stutter warning above 2 million triangles.
A four-way toggle group with the active choice pressed: Material shows the original PBR materials; Wireframe turns materials into triangle grids; Edges overlays dark outline lines on the model; Normals uses a coloured normal material to check face orientation and holes.
Six buttons that move the camera to that direction and frame the model automatically. Each one targets the model centre, so the model never leaves the view.
The button in the viewport toolbar: returns to the front view and fits the whole model into the frame, so use it when orbiting or zooming has drifted away.
Switch between perspective and orthographic: perspective gives near-and-far depth for judging appearance, orthographic has no perspective distortion and suits checking proportions and dimensions.
Studio, bright and dim presets adjust ambient light, key and fill light, and environment map intensity; changes apply immediately.
A slider from 0.2 to 2 with a 0.05 step that adjusts overall brightness live; the number box to the right shows the same value.
Type an exposure value directly; anything outside 0.2 to 2 is clamped to the limit, and the slider jumps to match so the two always agree.
The checkbox in the viewport toolbar: lays a ground grid under the model sized to the model, which helps judge orientation and where it sits; unchecking removes it.
The checkbox in the viewport toolbar: wraps the model in a blue bounding box wireframe so you can relate the outline to the length, width and height numbers.
Renders the current view into a frame and downloads it as a PNG named tool-id_model.png, for example 3d-model-viewer_bracket.png; the status line shows the file name when the download starts.
Renders the current view as a PNG and puts it on the clipboard so you can paste it into a chat or an email. When the browser cannot copy images, the status line suggests using Capture PNG instead.
Stores the current view as a PNG in member cloud storage: signed-out users get the sign-in dialog first, then the file uploads directly and the cloud list refreshes. A full quota or too many uploads are reported with the exact reason in the status line.
Shows the 3D viewport fullscreen, while the left control column stays out of fullscreen. Click again or press Esc to leave, and the viewport resizes automatically.
Appears only for STEP or IGES files: low (fast), medium and high (heavy) tessellation quality. Switching re-tessellates the current CAD file at the new quality, changing the triangle count and detail.
The button in the cloud model panel: uploads the current main model file to member cloud storage, up to 50 MB per file. Signed-out users get the sign-in dialog first; when the file set has companion files, the status line reminds you only the main file is stored.
The cloud model panel lists files saved from this tool with file name and size: click one to download it from the cloud and preview it directly. When a reopened glTF or OBJ lacks companion files, the status line reminds you to drop them in again.
Fetches the cloud file list for this tool again; the list also refreshes automatically after a successful upload.
The button that appears in the cloud panel when signed out: opens the site sign-in dialog, and the cloud list appears automatically once you are signed in.
Inside the 3D viewport, hold the left button and drag to orbit, scroll to zoom, and hold the right button or drag with two fingers to pan. Releasing eases to a stop with light damping, and the gestures never scroll the page by accident.
A persistent status under the viewport: loading the engine and CAD kernel, read progress, load success, missing companion files, unsupported format, oversized files, lost graphics context and cloud upload failures are all written here and never disappear. Failures show in red with the reason.
A persistent line at the bottom-right of the viewport with the file name, triangle count and dimensions, so you can confirm the right model is loaded before capturing without looking back at the statistics panel above.
Before a model loads, the centre of the viewport shows “Nothing loaded yet” with a note that everything stays local; it hides automatically once loading succeeds.
How It Works & Highlights
How it works, and where it fits
Model files reach the three.js loaders only as temporary browser Blob URLs, so parsing, materials and rendering all happen on your machine and no file leaves the browser. STEP and IGES are tessellated locally into triangle meshes by an OpenCASCADE WebAssembly kernel before entering the same render pipeline as other formats. The 3D engine and the Draco and KTX2 decoders are not loaded on the home page; they download on demand (about 2 MB) only when you open this page and actually load a model for the first time. Switching or removing a model traverses the scene graph and releases geometries, materials and textures, so opening large models repeatedly does not exhaust GPU memory.
Highlights
- ✓ GLB / glTF, OBJ, STL, PLY, STEP and IGES in one place, with Draco, Meshopt and KTX2 decoders wired in
- ✓ Zero-upload local rendering, so factory or customer models never pass through a third-party server first
- ✓ Six camera presets plus perspective / orthographic switching, with dimensions always on screen to measure before quoting
- ✓ Material, wireframe, edges and normals modes reveal structure, orientation and holes at a glance
- ✓ Captures go to a PNG download, the clipboard or member cloud storage, ready to send to a customer
- ✓ Three STEP tessellation quality levels, and signed-in users can save models to the cloud and reopen them later
Tips
- 💡 For a glTF, confirm the .bin is present first; without it the tool warns and cannot show the geometry
- 💡 For large STEP assemblies use low quality to check overall orientation, then switch to high quality for the final capture
- 💡 To verify proportions, switch to orthographic projection and turn on the bounding box — closer to drawing dimensions than perspective
- 💡 Before capturing, set lighting to bright and use an angle that shows three faces at once, so the customer reads the shape easily
- 💡 The cloud stores the main file only; keep the .bin, .mtl and textures at hand before reopening a glTF or OBJ
FAQ
Privacy, format limits, and usage tips
Related tutorials
Step-by-step guides for this tool on our blog