Image Grid Cropper Guide

2026-11-08 · Guides & How-tos · 5 min read · #image slicing #nine-grid #free cropping

Split a product photo into a nine-grid post, or crop a long listing image freely, all in this one tool: grid mode cuts evenly by rows and columns, free mode crops a selected area, names use direction codes by default, and you can export PNG or JPG or pack the slices into a ZIP. Everything runs locally in the browser. The original image is never uploaded.

A long product photo posted to a feed as one image gets squeezed into a small thumbnail where no detail is visible. A large image in a listing takes up a full screen, and customers scroll past it after two swipes. Crop first, then post: a nine-grid splits one photo into nine images posted in order, and a carousel walks through the product details one image at a time. A listing image is cropped to show only the part the layout needs. The image grid cropper on this site does all of it locally in the browser. The original image is never uploaded.

Which cutting method to use

Grid mode cuts the whole image evenly by rows and columns, which fits nine-grid posts, social carousels and listing image splits. Change the rows or columns and the whole image is re-cut at once. Free mode lets you drag a box on the canvas to keep one area, which fits photos where the subject is off centre, or where you only need one detail. Both modes share the same naming and export settings. After uploading one image, you can cut it in grid mode and then switch to free mode to crop more, without uploading again.

Method Best for How it works Naming and export
Grid slicing Nine-grid posts, social carousels, listing image splits Enter rows and columns (1-20, default 3x3), drag the blue split lines to adjust Same as free mode: direction-code names, export as PNG or JPG, or as a ZIP
Free cropping Photos with an off-centre subject, or where only a detail is needed Drag a box on the canvas, ratio lock 1:1, 4:3 or 16:9, hold Shift for a temporary square Same as grid mode: direction-code names, export as PNG or JPG, or as a ZIP

Grid slicing: five steps to a nine-grid

  1. Upload the image: click the upload area or drag the image in. PNG, JPG and WebP are supported, with a single image limit of 20MB.
  2. Set rows and columns to 1-20 each, default 3x3. Changing them re-cuts the image at once, with no extra confirm click. You can also use the presets 2x2, 3x3, 4x4, 1x3 and 3x1 for one-click slicing.
  3. Drag the blue split lines to adjust the borders, and the slices update with them. If the lines get messy, click 「Restore even split」 to return to an even grid at the current row and column counts.
  4. Check each slice in the list on the right: thumbnail and actual size per slice. Uncheck any slice you do not want to export. Click a row and the matching box on the canvas is highlighted. Click a box on the canvas and the matching list row is highlighted too.
  5. Click 「Preview export」 to check each thumbnail, then click 「Export ZIP」 to download the pack. The ZIP file is named after the original image with _slices added.

Free cropping: draw a box, lock the ratio, move the box

  1. Switch to free mode, hold the left mouse button on the canvas and drag a box. Releasing the button creates a new slice box.
  2. Ratio lock offers free, 1:1, 4:3 or 16:9. Drawing the box and resizing it with the bottom-right handle both follow the selected ratio. Hold Shift to draw a temporary square.
  3. Drag a slice box itself to move it. The box cannot go outside the image. With a box selected, press Delete or Backspace to remove it.
  4. If you make a mistake, there is no need to start over: undo is Ctrl+Z, redo is Ctrl+Y.

Shortcuts: Ctrl+Z undo, Ctrl+Y redo, Delete or Backspace removes the selected slice box; hold Shift while drawing a box to draw a temporary square.

Naming: how to read direction codes

Default names come from where the centre of a slice falls on the nine-grid of the original image: top-left LU, top-right RU, bottom-left LD, bottom-right RD, top U, bottom D, left L, right R, centre C, followed by a number inside that area, for example LU-01. When a box moves into a different area, its name updates automatically. But if you renamed a slice by hand in the list, moving it into a different area no longer changes the name. The manual name takes priority.

You can also change how names are built: add a prefix or a suffix to the name; use a sequence number {001} to number slices in order from 001; use rows and columns as {row}_{col}, so row 2, column 3 becomes 2_3; or fill in a name pool as a JSON array (for example ["header", "footer"]) and the names are used in order, cycling back to the start when the list runs out. Click 「Apply name pool」 to rename all existing slices.

Export settings: format, quality and square fill

Check these two things before posting

First, a nine-grid cuts evenly by rows and columns. If the original image is not square, or the subject sits off centre, the edges can be cut away. Check that the original image is square first, or use free mode to crop the subject into a square first. Second, before exporting, click 「Preview export」 and check each slice one by one. Uncheck any slice you do not want to export.

👉 Open the Image Grid Cropper now, upload a product photo and cut it once following the steps above: post the nine-grid in file order such as LU-01, RU-01, and the order stays correct. If you only want one slice, click the ⬇ button in its list row to download it directly.

🛠️ Tool used in this article

✂️ Image Grid Cropper

Split a product photo into a nine-grid post, or crop it freely to fit a listing layout and export the slices.

Runs locally in your browser; files are never uploaded.Split images into grids or crop freely for social carousels and listings.

Open Image Grid Cropper →

FAQ

Questions directly related to this guide

It can. A nine-grid cuts evenly by rows and columns, so if the original image is not square, or the subject sits off centre, the edges can be cut away. Check that the original image is square before slicing.
Yes. In grid mode, changing the rows and columns re-cuts the image at once, and the split lines can be dragged to adjust. In free mode, draw a box directly on the canvas, with ratio lock 1:1, 4:3 or 16:9, and hold Shift for a temporary square. On export, slices that are not square can use square fill.
No. Every list row has a ⬇ button. Click it to download that one slice directly, in the current export format and JPG quality, with the slice name as the file name. A slice with its export checkbox off can still be downloaded on its own.
PNG or JPG, as set in the export format. The ZIP file is named after the original image with _slices added. JPG quality runs 0.5 to 1, default 0.92. On JPG export, transparent fill areas become white. Choose PNG to keep transparency.